BlogEngine.Net 1.XX where have you gone?

Found a User Bug with WM7

13. January 2011 12:38 by Scott in   //  Tags:   //   Comments (15)

Found a small bug, more with the Zune software in WM7 than actual WM7 software.

The bug is as follows. 

  1. I was playing a song yesterday on my WM7 Samsung Focus. The song never ended before I stopped listening to music.
  2. I plugged my phone into the computer to sync Zune and my music.
  3. I unplugged after the sync had ended.
  4. Tried to play music and it would play visually, but not via audio.
  5. So I could see it playing, but it wasn’t coming out of the headphones.
  6. So I turned the phone off and back on again and everything then worked again.
  7. Looks to me like a minor software bug.

Just thought I would post for the good of the community.


Windows Phone 7 Transparent Background Sea Shepherds

27. December 2010 14:55 by Scott in   //  Tags:   //   Comments (0)

I created a brand new background for WM7 and figured I would share it out.  This one is interesting because its transparent when unlocking the phone for the first time.  You will have to take the file and either download it to your phone from this site, or send it to your self via email.  The actual background is in the Zip file.  The picture is just to show you what it looks like.

Once done, just open it and “use as wallpaper”.

Know issues with transparency:
1. Does not work with pin lock set
2. With certain apps open (like email for instance), you will see the bottom soft buttons through the wallpaper


The Best Damn Visual Studio Add-In Ever

14. December 2010 01:43 by Scott in   //  Tags:   //   Comments (75)

So way back when Scott Hansleman released RockScroll, I loved it.  Now that I have upgraded to Visual Studio 2010, it isn’t compatible.  So I went searching for another one just like it.  I found a tool called AllMargins and I must say its by far the best damn tool for Visual Studio!  I can’t get enough of it.  It adds on to your scroll bar give you vast amounts of information to view right away.  Its soo wonderful.  Go ahead and give it a try!  I sure did and love it!


OpenFire Error: Unrecognized Windows Sockets error: 0: JVM_Bind

23. November 2010 09:57 by Scott in   //  Tags:   //   Comments (0)

Got this Error when installing and Starting up OpenFire for the first time with the new Beta release of Openfire 3.7.0.

The Error:

Could not listen on port: 5229 Unrecognized Windows Sockets error: 0: JVM_Bind
    at Method)
    at Source)
    at Source)
    at<init>(Unknown Source)
    at org.jivesoftware.openfire.FlashCrossDomainHandler.startServer(
    at org.jivesoftware.openfire.FlashCrossDomainHandler.access$000(
    at org.jivesoftware.openfire.FlashCrossDomainHandler$
    at Source)

The Fix:

I had to figure out what was already bound to that Port and shut the service down. 

So to figure out what port to release

  1. type 'Netstat -a -n -o' on your command prompt
  2. Note the PID corresponds to the port which you want to release
  3. type the command 'tasklist /svc /FI "PID eq <THEPID>”’
  4. Note the task name listed on command prompt (below Image name)
  5. Kill that task from taskmanager

Hope It helps someone

How to convert a DTED (Elevation) File to a Raster

29. September 2010 12:46 by Scott in   //  Tags:   //   Comments (62)

Since I couldn’t find it on the internet, I decided to post it here.

using ESRI.ArcGIS.Geodatabase;
using ESRI.ArcGIS.DataSourcesRaster;
string dtedFile = @"C:\Examples\DTED Level 2\E35\N82.DT2";
IWorkspaceFactory workspaceFactoryShape = new RasterWorkspaceFactoryClass();
IRasterWorkspace rasterWorkspace = (IRasterWorkspace)workspaceFactoryShape.OpenFromFile(System.IO.Path.GetDirectoryName(dtedFile), 0);
IRasterDataset ds = rasterWorkspace.OpenRasterDataset(System.IO.Path.GetFileName(dtedFile));
IRaster raster = ds.CreateDefaultRaster();

A few things to point out:

  1. The OpenFromFile method is only looking for the directory and not actually the file name.  It has to open a workspace before it opens the file.
  2. The OpenRasterDataset method is where you give just the file name of the dted file.  Remember it already has the file path I stated in the first point.

This code took me almost a full day to figure out.  Its not easily findable on the internet.  Hope it helps someone else out there.


If you liked this post, please be sure to subscribe to my RSS Feed.

Internet Explorer 9 and Their Javascript Problem

19. September 2010 20:52 by Scott in   //  Tags:   //   Comments (3)

I own a website over at  I have well over 2 million pageviews daily and most of my users are Firefoxers or Chromers.  But when I run Internet Explorer against my site I receive a few errors.  Even with the brand new Internet Explorer 9 Beta, there is still a Javascript problem.  I use third party tools such as Google Analytics and the Intense Debate comment system.  Each third party tool also employs the same javascript file from Quantserve that I pull for my site.

The problem is this, IE doesn’t just pull one quant.js file for all three times it gets mentioned in my site, It pulls it three times.  Therefore it gets declared three times along with all the global javascript variables. That means I receive errors and can’t run all my javascript code correctly. But what browsers do this correctly?  Chrome and Firefox, and its because of small things like this, why I keep surfing with Firefox and Chrome and just don’t touch IE.

This article was written with specific intent to reach the Internet Explorer Team and hope they make a fix before IE 9 comes out of Beta.


If you liked this post, please be sure to subscribe to my RSS Feed.

How to Shrink a SQL Transaction Log File

13. September 2010 13:58 by Scott in   //  Tags:   //   Comments (42)

I was having trouble with a transaction log file that had unrestricted growth set.  I needed to get it down to a good size without killing my disk space.  So below is the script I used to shrink the transaction log after it had gone a little wild with size.

log 'yourdatabasename' to disk ='D:\YourdatabaseName.trn'
shrinkfile (yourdatabase_logfilename,1)
If you liked this post, please be sure to subscribe to my RSS Feed.

The path X is already mapped in workspace Y

31. August 2010 14:42 by Scott in   //  Tags:   //   Comments (14)

When running Team Foundation Server, I ran into a slight problem.  I just finished installing TFS 2010 and while I had old code, I needed to upload that old code to TFS 2010.

So I began the process and to my dismay, the code was already mapped to another directory.  So after searching around, I couldn’t find anything.

So I went looking around. Under this directory, I found a version control file.  After looking at it, I noticed the maps.  So all I did was delete the old server maps in the config file and all seemed to work.

C:\Documents and Settings\[user]\Local Settings\Application Data\Microsoft\Team Foundation\3.0\Cache\VersionControl.config

I hope this helps.

If you liked this post, please be sure to subscribe to my RSS Feed.

A URL Friendly Guid, but Not Shorter…

17. August 2010 13:35 by Scott in   //  Tags:   //   Comments (0)

I have a website that gets thousands upon thousands of hits a day.  And I use guids to identifiy everything.  So I needed something to show Guids in the URLS.  The best thing I found at that moment was Mads Kristensen’s Shorter URL Friendly Guid

Mads basically converts the Guid to base 64.  For a small website of sorts, this isn’t a bad idea.  But overtime and larger websites there will be more and more Guids represented.  After coming up with several errors in my site, I decided to investigate.  When converting to Base64 with Guids, I started to notice some slight loss of the Guid.  When I say slight, I mean one in every 2000 users had shown errors.  To me this isn’t acceptable by any means.  One user can destroy an entire website by talking slander so I was in need of a fix. 

So I threw out Mads idea and went searching for something different.  Its not uncommon to still use Guids in URL’s.  With the Dashes and all.  Microsoft, Flickr, Yahoo, Google, and some various other third party websites still use them in their URLs.  But I didn’t want the dashes.  I wanted just the numbers and letters.  Dashes could some day cause a problem, but not just numbers and letters.  So I decided to get rid of the dashes.  So here is the final code to use Guids as Urls.

I have a Guid extension class in C#.  One method is as follows:

public static string RemoveDashes(this Guid guid)
 return guid.ToString().Replace("-","");

This method gets called when ever I convert a Guid to a URL.  Whats nice about this, is the way I convert the Guid back with dashes.  No real fiddling with strings.  All that needs to be done is this:

Guid guid = new Guid("c9a646d39c614cb7bfcdee2522c8f633");

And that automatically puts the dashes back into the system.

If you liked this post, please be sure to subscribe to my RSS Feed.

Binding LINQ to Silverlight Listview

13. August 2010 10:03 by Scott in   //  Tags:   //   Comments (0)

I hate having to look deep and hard and then when I don’t find anything on Google, I move into uncharted territory.  So here is some code on how to bind a Silverlight Listview with LINQ.

One point, I don’t care that much about making this that presentable, so here is what I wrote.  The LINQ could probably be built better, but if you know what I work or who I work for, you know that all I build is Demo Apps.  So this won’t be production, its just showing the fact that it can be done. This Demo shows Hurricanes in a Listview.  The list of hurricanes were pulled from the NOAA site.

A few things to point out:

  1. I pulled all the hurricanes from the DB and then started working on them.  So everything is already in cache.
  2. When doing Hierarchical data tempates, the ITEMSOURCE and ITEM templates are point to the the next lower level of the Template.  So if you look in the XAML, you will see the the item source and item templates point to the next layer down. I didn’t know this.

C# Service:

public class HurricaneServices : IHurricaneServices
        public List<HurricanesClass> GetHurricanes()
            var hurricanes = HurricanesClass.GetCachedHurricanes();

             return(from xx in hurricanes
                      group xx by xx.Hurricane_Name into gg
                      orderby gg.FirstOrDefault().DateTime_Reported descending
                      where gg.Key != null
                      select new HurricanesClass
                          Hurricane_Name = gg.Key.Replace(".mxd", ""),
                          Types = (from yy in hurricanes
                                   where yy.Hurricane_Name == gg.Key
                                   group yy by yy.Type into zz
                                   where zz.Key != null
                                   select new HurricanesClass
                                       Type = zz.Key,
                                       Services = (from cc in hurricanes
                                                   where cc.Type == zz.Key
                                                   where cc.Hurricane_Name == gg.Key
                                                   orderby cc.DateTime_Reported descending
                                                   select new HurricanesClass
                                                       DateTime_Reported = cc.DateTime_Reported,
                                                       Webservice_Name = cc.Webservice_Name,
                                                       Webservice_URL = cc.Webservice_URL,

Here is the XAML it is binded to:

<Grid x:Name="LayoutRoot" Background="White">
            <sdk:HierarchicalDataTemplate x:Key="HurricaneServices">
                <StackPanel MouseLeftButtonDown="StackPanel_MouseLeftButtonDown">
                    <TextBlock Text="{Binding Path=Webservice_Name}"></TextBlock>
                    <TextBlock Text="{Binding Path=DateTime_Reported}"></TextBlock>
                    <TextBlock x:Name="wsURL" Text="{Binding Path=Webservice_URL}"></TextBlock>
            <sdk:HierarchicalDataTemplate x:Key="HurricaneTypes" ItemsSource="{Binding Path=Services}" ItemTemplate="{StaticResource HurricaneServices}">
                    <TextBlock Text="{Binding Path=Type}"></TextBlock>
            <sdk:HierarchicalDataTemplate x:Key="HurricaneNames" ItemsSource="{Binding Path=Types}" ItemTemplate="{StaticResource HurricaneTypes}">
                    <TextBlock Text="{Binding Path=Hurricane_Name}"></TextBlock>
        <sdk:TreeView x:Name="mytree" ItemTemplate="{StaticResource HurricaneNames}" Grid.Row="0" Grid.Column="0" Height="300" Width="800" Background="Gray">

And last but not least, the Binding Syntax.  The code behind of the XAML page.

     public HurricaneData()
            HurricaneService.HurricaneServicesClient ws = new HurricaneService.HurricaneServicesClient();
            ws.GetHurricanesCompleted += new EventHandler<HurricaneService.GetHurricanesCompletedEventArgs>(webService_GetCustomersByLastNameCompleted);
        void webService_GetCustomersByLastNameCompleted(object sender, HurricaneService.GetHurricanesCompletedEventArgs e)
            mytree.ItemsSource = e.Result;
If you liked this post, please be sure to subscribe to my RSS Feed.